The mold and injection molding production process for kitchen and bathroom outlet valve accessories is as follows:
Mold design: Design the corresponding injection mold according to the shape and size requirements of the outlet valve accessories. Molds usually consist of a mold core and a mold cavity. Single-cavity molds or multi-cavity molds can be selected according to the complexity of the product and production needs.
Material selection: Select appropriate injection molding materials according to product requirements and usage environment. Common materials include polypropylene (PP), polyethylene (PE), polyvinyl chloride (PVC), etc. Materials need to have properties such as corrosion resistance, high temperature resistance, and wear resistance.
Injection molding process control: During the injection molding process, parameters such as temperature, pressure, and injection speed of the injection machine need to be controlled. According to the melting temperature and fluidity of the material, adjust the parameters of the injection machine to ensure that the plastic material is fully melted and filled in the mold.
Cooling control: After injection molding, a cooling process is required to solidify the plastic material. By controlling the cooling system of the mold and adjusting the cooling time and cooling temperature, the dimensional stability and quality of the product are ensured.
Demolding and post-processing: After injection molding, the product needs to be removed from the mold. The product is ejected through the ejection mechanism of the mold or other demoulding devices. Then perform post-processing, such as removing burrs, trimming edges, etc.
Through reasonable mold design and precise injection molding process control, high-quality kitchen and bathroom outlet valve accessories can be produced.Faucet: A faucet is a water outlet device that connects water pipes and sinks. It usually consists of a valve core, a handle and a nozzle. Faucets can control the on/off and flow rate of water flow. Common types include single-handle and double-handle faucets.
Water pipe joint: Water pipe joint is used to connect faucets and water pipes. There are usually two types: threaded joints and quick connectors. Threaded couplings require tools to tighten, while quick couplings can be inserted and removed directly.
Water pipe elbow: Water pipe elbow is used to change the flow direction of water pipes, usually with two angles of 90 degrees and 45 degrees. Water pipe elbows can be adjusted and installed as needed.
Water valve: Water valve is used to control the flow of water. There are usually two types: manual valve and automatic valve. Manual valves require manual rotation or push and pull to control water flow, while automatic valves can control water flow through sensors or buttons.
Water seal: The water seal is used to prevent the backflow of sewage and the spread of odors, and is usually installed under the sink. The water seal can be cleaned and replaced as needed... please send us a message (Email: info@ansixtech.com ) at any time and our team will reply to you within 12 hours.